Omron C200HE ユーザーズマニュアル
498
Limitations
Multiple responses to a command can be cancelled with this command.
This command is valid even without the FCS code and terminator.
PC Settings
PC Mode
UM Area
RUN
MONITOR
PROGRAM
Write-protected
Read-protected
OK
OK
OK
OK
OK
Execution Conditions
Commands
Responses
Single
Multiple
Single
Multiple
OK
---
---
---
End Codes
There are no end codes with this command.
10-3-38
INITIALIZE ––
Initializes the transmission control procedure of all the PCs connected to the
host computer. The INITIALIZE command does not use node numbers or FCS,
and does not receive a response.
host computer. The INITIALIZE command does not use node numbers or FCS,
and does not receive a response.
Command Format
↵
@
Limitations
Multiple responses to a command can be cancelled with this command.
PC Settings
PC Mode
UM Area
RUN
MONITOR
PROGRAM
Write-protected
Read-protected
OK
OK
OK
OK
OK
Execution Conditions
Commands
Responses
Single
Multiple
Single
Multiple
OK
---
---
---
End Codes
There are no end codes with this command.
10-3-39
TXD RESPONSE –– EX
This is the response format used when the PC’s TXD(––) instruction is executed
in Host Link mode. (TXD(––) converts the specified data into ASCII code and
transmits it to the host computer with this format.)
in Host Link mode. (TXD(––) converts the specified data into ASCII code and
transmits it to the host computer with this format.)
Response Format
@
E
X
x 10
0
x 10
1
↵
Node no.
Header
code
code
Characters (122 max.)
Data specified in TXD(––)
Terminator
FCS
Limitations
The frame can contain up to 122 characters. (TXD(––) doesn’t support multiple
frames.)
frames.)
There is no command associated with EX.
PC Settings
PC Mode
UM Area
RUN
MONITOR
PROGRAM
Write-protected
Read-protected
OK
OK
---
OK
OK
Host Link Commands
Section 10-3