Omron C200HE ユーザーズマニュアル

DM 6654

00 to 07

Start code (RS-232C)
00 to FF (binary)

0000

08 to 15

12 to 15 of DM 6653 set to 0:
Number of bytes received
00: Default setting (256 bytes)
01 to FF: 1 to 255 bytes

12 to 15 of DM 6653 set to 1:
End code (RS-232C)
00 to FF (binary)

The following settings are accessed continually while the PC is ON.

DM 6655

00 to 03

Interrupt programming error enable
0: Detect interrupt programming errors
1: Do not detect

Detect

04 to 07

Reserved

---

08 to 11

Cycle time monitor enable
0: Detect long cycles as non-fatal errors
1: Do not detect long cycles

Detect

12 to 15

Low battery error enable
0: Detect low battery voltage as non-fatal error
1: Do not detect low battery voltage

Detect

DM 6550 through DM 6554 contain the communications settings for Commu-
nications Board port B and DM 6555 through DM 6559 contain the communica-
tions settings for Communications Board port A.

The following settings are accessed continually while the PC is ON.

DM 6550

00 to 03

Port settings
0: Standard (1 start bit, 7-bit data, even parity, 2 stop bits, 9,600 bps)
1: Settings in DM 6551

Standard

04 to 07

CTS control setting
0: Disable CTS control
1: Enable CTS control

Disable

08 to 11

Words linked for 1:1 PC Link (Cannot be changed once set in the 1:1 PC
Link Master.)
0: LR 00 to LR 63; 1: LR 00 to LR 31; 2: LR 00 to LR 15

Maximum PT node number for 1:N NT Link
1 to 7 BCD (1 to 3 with a C200HE-CPU

-E

 

PC)

LR 00 to LR 63

12 to 15

Communications mode
0: Host Link; 1: RS-232C; 2: 1:1 PC Link slave; 3: 1:1 PC Link master;
4: 1:1 NT Link; 5: 1:N NT Link; 6: Protocol Macro

Host Link