HP (Hewlett-Packard) 1040 ユーザーズマニュアル

Feature reference  52

Reprinting faxes

Reprinting faxes

You may sometimes need to reprint a received fax. Your machine stores the most recently 
received faxes in memory (approximately 100 pages). As this memory is filled, old faxes 
that have been printed will be erased to make room for new faxes. 

HP 1040 Fax: Unplugging the fax machine power cord and plugging it back in 

again clears the memory including all unprinted or unsent faxes. A power outage also 
clears the fax machine memory.

HP 1050 Fax: The device has 30 minutes of backup memory. If the power is off 

longer than that, the faxes will be cleared.

Press Report/Help.

Press 

!"

 to choose

 Print Fax 

and press Start/Enter.

• If there are only old faxes, the machine will automatically print all of them and 

return to Ready mode without moving to the next step.

• If there are no faxes in memory, the machine will inform you by displaying 

Memory 

Empty.

• If there are both old faxes and unprinted faxes in memory, the machine will go to 

step 3.

Select between

 Print New Fax 

or

 Reprint Old Fax 

and press Start/Enter.

•

Print New Fax

: The machine prints all new faxes which have never been printed.

•

Reprint Old Fax

: The machine prints all faxes regardless of new or old.

System Data

This report shows the current settings of your HP Fax. After you 
have changed any setting, print this report to check your 
changes.

Caller ID

If Caller ID is turned on, this report shows the most recent 30 
callers who have called your machine. The report will be empty 
if you don’t have Caller ID turned on.

Junk Fax

This report shows the telephone numbers that are marked as a 
junk fax to be blocked.

TAM Status

HP 1050: This report shows you the status of the message center.

Print Fax

Your machine stores fax data into memory as far as the memory 
is available and lets you print it at later time. For more 
information, see