OKI 56801 ユーザーズマニュアル
42
your fax machine automatically sends a call back
message to the remote site giving a telephone number
where you can be reached.
message to the remote site giving a telephone number
where you can be reached.
A call back message is only sent if you have programmed
a call back number into your fax machine. Refer to
“Setting Fax Machine Identification” on page 25.
a call back number into your fax machine. Refer to
“Setting Fax Machine Identification” on page 25.
Answering Voice Request
1. Lift the handset and press the
Hook/V. Request
key.
Advanced Operations
Broadcast
A broadcast fax is a fax sent to several locations and is a one-
time event. It consists of a collection of destinations (fax and/or
email addresses) and is NOT saved (programmed) into the
machine.
time event. It consists of a collection of destinations (fax and/or
email addresses) and is NOT saved (programmed) into the
machine.
A broadcast can be any combination of One-Touch or Auto-Dial
keys or manually entered number(s) from the numeric keypad. If
an email address is required, only those pre-programmed can be
used. The manually entered numbers must be entered last.
keys or manually entered number(s) from the numeric keypad. If
an email address is required, only those pre-programmed can be
used. The manually entered numbers must be entered last.
Refer to “Programming Auto Dial Numbers” on page 31 for
further reference.
further reference.
Perform a Broadcast Operation
1. Load your documents.
2. Enter locations by pressing One-Touch keys or Auto Dials.
3. After pressing the first entry, you have three seconds to enter
2. Enter locations by pressing One-Touch keys or Auto Dials.
3. After pressing the first entry, you have three seconds to enter
the next location in your broadcast list. The machine groups
the list of numbers for the broadcast. You must enter the
One-Touch and Auto Dial numbers before entering manual
the list of numbers for the broadcast. You must enter the
One-Touch and Auto Dial numbers before entering manual