Zhone Technologies 4929 DSLAM ユーザーズマニュアル

24

4929 DSLAM Installation and User’s Guide

4929-A2-ZN20-30

8 Hang the unit from the wood screws to verify that the screws are properly 

placed. The screws should freely slide into the top of the key slots in the 

brackets.
Do not fasten the unit to the wall until after it is completely cabled and 

tested.

If the DSLAM will be placed on a shelf or desktop, install the provided rubber 
feet before putting the unit in position.

To install the DSLAM on a shelf or desktop, as a standalone unit or in a stack:

1 Locate the rubber feet in the hardware kit provided with the unit. 

2 Turn the unit upside down on a flat surface. Squares stamped into the 

bottom of the unit show the proper positions for the feet.

3 Remove the protective sheet from the bottom of each foot, then press the 

foot onto a corner of the bottom of the unit.

4 Turn the unit right side up and place it in position on a shelf or desktop. 

5 If the installation includes more than one unit, one can be stacked atop 

another. Up to eight units can be stacked together. 

03-17439