Zhone Technologies 4929 DSLAM ユーザーズマニュアル

26

4929 DSLAM Installation and User’s Guide

4929-A2-ZN20-30

A Micro Interface Module (MIM) is not required for operation. It provides 
additional  Ethernet, T1, or E1 uplink ports for the DSLAM, depending upon 
the MIM model installed. 

To install a MIM:

1 Using a flat-head screwdriver to loosen the fastening screws, remove the 

blanking plate covering the MIM port on the front of the DSLAM.

2 Align the MIM with the module guides inside the DSLAM's MIM port.

3 Slide the MIM into the chassis until it is fully seated. 

4 Secure the MIM by tightening the fastening screws on the MIM faceplate 

with a flat-head screwdriver.

5 Cable the MIM as described in the MIM installation instructions.

05-17617

+

ACT

+

LK

ACT

LK