HP (Hewlett-Packard) EX691UA-NOOS ユーザーズマニュアル

To set, change, or delete this password:

Open the Setup Utility by turning on or restarting the computer, and then pressing 

f10

 while the

setup message is displayed in the lower-left corner of the screen.

Use the arrow keys to select Security > Administrator Password, and then press 

enter

.

●

To set an administrator password, type your password in the Enter New Password and
Confirm New Password fields, and then press 

enter

.

●

To change an administrator password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press 

enter

.

●

To delete an administrator password, type your current password in the Enter Current
Password field, and then press 

enter

 4 times.

To save your preferences and exit the Setup Utility, press 

f10

, and then follow the instructions

on the screen.

Your preferences go into effect when the computer restarts.

After an administrator password has been set, you will be prompted to enter your password each
time you access the Setup Utility.

At the Enter Password prompt, type in the administrator password (using the same keys you used
to set your password), and then press 

enter

. After 3 unsuccessful attempts to enter the administrator

password, you must restart the computer and try again.

The power-on password prevents unauthorized use of the computer. After this password is set, it
must be entered each time you turn on the computer or restart or restore from hibernation. A power-
on password is not displayed as it is set, entered, changed, or deleted.

ENWW

Passwords

135