HP (Hewlett-Packard) EX691UA-NOOS ユーザーズマニュアル
Managing a power-on password
To set, change, or delete this password:
1.
Open the Setup Utility by turning on or restarting the computer, and then pressing
f10
while the
setup message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Security > Power-On password, and then press
enter
.
●
To set a power-on password, type your password in the Enter New Password and
Confirm New Password fields, and then press
Confirm New Password fields, and then press
enter
.
●
To change a power-on password, type your current password in the Enter Current
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press
Password field, type a new password in the Enter New Password and Confirm New
Password fields, and then press
enter
.
●
To delete a power-on password, type your current password in the Enter Current
Password field, and then press
Password field, and then press
enter
4 times.
3.
To save your preferences and exit the Setup Utility, press
f10
, and then follow the instructions
on the screen.
Your preferences go into effect when the computer restarts.
Entering a power-on password
At the Enter Password prompt, type your password (using the same keys you used to set your
password), and then press
password), and then press
enter
. After 3 unsuccessful attempts to enter your password, you must
restart the computer and try again.
136
Chapter 11 Security
ENWW