HP (Hewlett-Packard) C6Z52UTABA ユーザーズマニュアル

Remove the power button board (4) and cable by sliding it up and to the left at an angle.

Reverse this procedure to install the power button board.

Smart Card reader assembly (includes Smart Card reader cable and function LED board cable)

685503-001

Before removing the Smart Card reader assembly, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see 

), and then remove the following components:

Service cover (see 

)

Bluetooth module (see 

)

Speaker assembly (see 

Optical drive (see 

)

Hard drive (see 

92

Chapter 4   Removal and replacement procedures