HP (Hewlett-Packard) C6Z52UTABA ユーザーズマニュアル
Power button board
Description
Spare part number
Power button board (includes cable)
685408-001
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
), and then remove the following components:
a.
Service cover (see
)
b.
Bluetooth module (see
)
c.
Speaker assembly (see
)
d.
Optical drive (see
)
e.
f.
Fan (see
)
g.
WWAN module (see
)
h.
)
i.
Keyboard (see
j.
Base enclosure (see
)
k.
System board (see
l.
Top cover (see
Remove the power button board:
1.
Position the top cover with the top edge toward you.
2.
Release the tape (1) the secures the power button board cable to the top cover.
3.
Remove the Phillips PM2.0×3.6 screw (2) that secures the power button board to the top cover.
4.
Lift the left side of the power button board (3) until it rests at an angle.
Component replacement procedures
91