Nortel Networks BSG12ew ユーザーズマニュアル
45
Installation
Cable connection
The following sections describe how to connect power, LAN devices, analog lines, and analog
telephones to the Business Services Gateway 8-port (BSG8ew) and the Business Services
Gateway 12-port (BSG12ew/aw/tw) and how to connect the BSG8ew and the BSG12ew/aw/tw to
the WAN and LAN. For the BSG12ew/aw/tw, the following section describes how to connect the
console.
telephones to the Business Services Gateway 8-port (BSG8ew) and the Business Services
Gateway 12-port (BSG12ew/aw/tw) and how to connect the BSG8ew and the BSG12ew/aw/tw to
the WAN and LAN. For the BSG12ew/aw/tw, the following section describes how to connect the
console.
Cable connection navigation
•
•
•
•
•
•
•
•
Prerequisites to cable connection
•
Install the BSG8ew/12ew/aw/tw.
•
For the locations of the BSG8ew/12ew/aw/tw ports, see
.
Connecting power to the BSG8ew
Use this procedure to connect power to the BSG8ew.
Prerequisites
•
Install the BSG8ew.
•
If the BSG8ew is mounted on a wall, install the single power supply mounting bracket.
Procedure steps
Step
Action
1
Rotate the retention clip so the power outlet is open.
2
Plug the power-supply cord into the BSG8ew.
3
Rotate the retention clip so that it locks the power-supply cord in place.