Nortel Networks 4050 ユーザーズマニュアル
Chapter 12 Configuring SNMP 633
Nortel Secure Network Access Switch 4050 User Guide
2
Enter the SNMP Configuration information in the applicable fields.
describes the SNMP Configuration fields.
3
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 132
SNMP Configuration fields
Field
Description
SONMP
When checked, enables support for SynOptics Network
Management Protocol (SONMP) network topology
information. The default is disabled (unchecked).
Management Protocol (SONMP) network topology
information. The default is disabled (unchecked).
System Contact
Designates a contact person for the managed Nortel
SNAS 4050 cluster, together with information about how to
contact this person.
SNAS 4050 cluster, together with information about how to
contact this person.
Authentication Traps
Enabled
Enabled
When checked, enables generating authentication failure
traps. The default is disabled (unchecked).
traps. The default is disabled (unchecked).
SNMP Enabled
When checked, enables network management using
SNMP. The default is enabled.
SNMP. The default is enabled.
Versions
Specifies the SNMP versions allowed. Check one or more
of the following options: v1 (SNMP version 1), v2c (SNMP
version 2c), v3 (SNMP version 3).
of the following options: v1 (SNMP version 1), v2c (SNMP
version 2c), v3 (SNMP version 3).
The default is all versions (v1, v2c, v3).
Read
Specifies the monitor community name that grants read
access to the MIB. If you do not specify a monitor
community name, read access is not granted. The default
monitor community name is
access to the MIB. If you do not specify a monitor
community name, read access is not granted. The default
monitor community name is
public
.
Write
Specifies the control community name that grants read and
write access to the MIB. If you do not specify a control
community name, neither read nor write access is granted.
write access to the MIB. If you do not specify a control
community name, neither read nor write access is granted.
Trap
Specifies the trap community name that accompanies trap
messages sent to the SNMP manager. If you do not specify
a trap community name, the sending of trap messages is
disabled. The default trap community name is
messages sent to the SNMP manager. If you do not specify
a trap community name, the sending of trap messages is
disabled. The default trap community name is
trap
.