Nortel Networks 4050 用户手册

Chapter 12 Configuring SNMP 633

Nortel Secure Network Access Switch 4050 User Guide

 

Enter the SNMP Configuration information in the applicable fields. 

 

describes the SNMP Configuration fields.

Click Apply on the toolbar to send the current changes to the Nortel 
SNAS 4050. Click Commit on the toolbar to save the changes permanently.

SNMP Configuration fields

SONMP

When checked, enables support for SynOptics Network 
Management Protocol (SONMP) network topology 
information. The default is disabled (unchecked).

System Contact

Designates a contact person for the managed Nortel 
SNAS 4050 cluster, together with information about how to 
contact this person.

Authentication Traps 
Enabled

When checked, enables generating authentication failure 
traps. The default is disabled (unchecked).

SNMP Enabled

When checked, enables network management using 
SNMP. The default is enabled.

Versions

Specifies the SNMP versions allowed. Check one or more 
of the following options: v1 (SNMP version 1), v2c (SNMP 
version 2c), v3 (SNMP version 3).

The default is all versions (v1, v2c, v3).

Read

Specifies the monitor community name that grants read 
access to the MIB. If you do not specify a monitor 
community name, read access is not granted. The default 
monitor community name is 

public

.

Write

Specifies the control community name that grants read and 
write access to the MIB. If you do not specify a control 
community name, neither read nor write access is granted.

Trap

Specifies the trap community name that accompanies trap 
messages sent to the SNMP manager. If you do not specify 
a trap community name, the sending of trap messages is 
disabled. The default trap community name is 

trap

.