GE 23954 ユーザーズマニュアル

The various commands are split in different groups, depending on the involved functionality, and are 
listed here in accordance with their group classification.  
The command-line interface includes a command auto-completion feature. Normally, typing a 
command without any parameter displays usage information on the command. A help command is 
also available. 
Note that all commands are case-sensitive. 
 
 

2.2.1  General command group 

The general command group consists of the following commands: 
 

general | network | dns | 
user | service |  

time  | smtp | snmp | 
trap | ups | rccmd | 

events | log  

Show help information 

general   shows all general commands 

network  shows all network commands 
etc … 

 

List all available commands 

 

Display the board FW version 

 

User logout 

NOTE: Auto-logout after 10 min inactivity 

 User 

logout 

Change current user password 

 

NOTE: Password length is limited to 8 chars.  
The command line interface may accept longer passwords, although 

only the first 8 characters are significant. 

[hostname] | [X.X.X.X] 

Ping IP address or hostname 

hostname fully 

qualified 

hostname 

X.X.X.X IP-address 

 

Reset the configuration to factory default 

 

Save changes to non-volatile memory 

 

Dump configuration file (gedeups.cfg) to FTP area  

Update the SNMP/Web configuration with the gedeups.cfg file from 

the FTP area 

 

NOTE: The adapter performs no checks on the received file. Make sure 

the file format is correct - unexpected behaviour may occur. 

Start the upgrade with the uploaded firmware 

NOTE: FW file to be uploaded via FTP 

 

 

System restart (soft-reset) 

NOTE: All unsaved changes will be lost 

Modifications reserved 

Page 14/58 

OPM_CNT_SNM_BAS_CRD_1GB_V012.doc 

Operating Manual SNMP/Web Adapter