Lantronix EPS2-100 ユーザーズマニュアル
Frequently-used Commands
M - 12
M.3 Protocol Commands
In the following table, PROTO is an abbreviation for the optional keyword PROTOCOL.
Table M-3: Protocol Commands
Command
Option(s)
Description
DEFINE
IPSECURITY
ipaddress option
Note: An
ipaddress
with a 0 in any segment
implies Incoming and Out-
going Disabled. An
implies Incoming and Out-
going Disabled. An
ipaddress
with a 255
in any segment applies to
all addresses in that range.
all addresses in that range.
Note: Rules are applied in
the order in which they are
entered.
the order in which they are
entered.
PORTS nn
Restricts connections to the specified IP address from
the specified ports, and connections from the IP address
to the specified ports. If no port (
the specified ports, and connections from the IP address
to the specified ports. If no port (
nn
) is specified, the
command applies to all physical and virtual ports. See
the Port Commands section for information about port
lists.
the Port Commands section for information about port
lists.
INCOMING
{EN|DIS}
Allows or restricts connections and serial port logins
from the specified address (on the network) into the
Server.
from the specified address (on the network) into the
Server.
OUTGOING
{EN|DIS}
Allows or restricts Telnet sessions to the specified
address (on the network) from the Server.
address (on the network) from the Server.
BOTH {EN|DIS}
Allows or restricts connections to and from the speci-
fied address.
fied address.
PRINTING
{EN|DIS}
Allows or restricts TCP/IP-based printing for the speci-
fied address.
fied address.