Honeywell HC900 ユーザーズマニュアル

Components and Architecture - Hardware Components 

12 

  HC900 Hybrid Controller Installation and User Guide 

Revision 5 

  

9/03 

A Personal Computer is required for creating the control and data acquisition strategy (configuration file) 
that runs in the controller, using the Hybrid Control Designer configuration software.  The PC can also be 
used to download/upload configuration files to/from the controller, and can be used to download program 
updates to firmware in the Controller Module and/or Scanner Modules.  

A PC can be connected to the controller via the RS-232 Port on the Controller module, and can also be 
networked to the controller via the Ethernet 10BaseT Open Connectivity Network port.  

NOTE: For specific PC requirements and for specific software requirements, refer to the Hybrid Control 
Designer Users Manual.  

The PC configuration tool 
connects from the RS-232 
connector on the upper part 
of the Controller Module to a 
serial port on the PC.  The PC 
can be located remote from 
the Controller by using 
Modems and telephone links.  
Modems and suitable cabling 
are available from third-party 
vendors.