Mitsumi electronic NZ2GF-ETB ユーザーズマニュアル
25
CHAPTER 2 PART NAMES
2
2.2 C
C
-Link IE Field N
etwork Par
t
Remark
● LED indication during line test execution
While a line test is being performed from the master station, the following LEDs are flashing.
• MODE LED
• D LINK LED
• ×100 LED
• D LINK LED
• ×100 LED
For execution of the line test, refer to the following.
User's manual for the master/local module used
Name
Description
ERR. LED
Indicates the error status of the Ethernet adapter module.
The error details can be checked by the CC-Link IE Field Network diagnostics. (
On
One of the following errors occurred in the Ethernet adapter module.
• Multiple modules with the same station number exist on CC-Link IE Field Network.
• Network parameters for CC-Link IE Field Network is corrupted. Or, there is an error in the reserved station
• Network parameters for CC-Link IE Field Network is corrupted. Or, there is an error in the reserved station
setting, the number of connected stations, or the network number setting.
• There is an error in the network parameter settings for the Ethernet adapter module.
Off
Normally operating.
L ERR. LED
Indicates the error status of the received data and the line. When this LED is on, check the L ER LED for "P1" or
"P2" to see on which port the error was detected.
"P2" to see on which port the error was detected.
The error details can be checked by the CC-Link IE Field Network diagnostics. (
This LED automatically turns off when the module has received normal data and loopback is completed.
On
• The Ethernet adapter module has received abnormal data.
• The Ethernet adapter module is performing loopback (only the Ethernet adapter module with a serial number
• The Ethernet adapter module is performing loopback (only the Ethernet adapter module with a serial number
(first five digits) of "12102" or later).
Off
• The Ethernet adapter module has received normal data.
• The Ethernet adapter module does not perform loopback (only the Ethernet adapter module with a serial number
• The Ethernet adapter module does not perform loopback (only the Ethernet adapter module with a serial number
(first five digits) of "12102" or later).
STATION NO.
Indicates the station number of the Ethernet adapter module.
On
Indicates the station number.
Station No.15
Off
The station number has not been set.
Ex.
1
10
100
10
5
+
= 15
1
2
8
4
: On
: Flashing
Flashing