Motorola MCF5281 ユーザーズマニュアル
MOTOROLA
Chapter 23. UART Modules
23-9
Register Descriptions
23.3.5 UART Command Registers (UCRn)
The UCRs, shown in Figure 23-6, supply commands to the UART. Only multiple
commands that do not conflict can be specified in a single write to a UCRn. For example,
commands that do not conflict can be specified in a single write to a UCRn. For example,
RESET
TRANSMITTER
and
ENABLE
TRANSMITTER
cannot be specified in one command.
Table 23-6 describes UCRn fields and commands. Examples in Section 23.5.2,
“Transmitter and Receiver Operating Modes,” show how these commands are used.
“Transmitter and Receiver Operating Modes,” show how these commands are used.
Table 23-5. UCSRn Field Descriptions
Bits
Name
Description
7–4
RCS
Receiver clock select. Selects the clock source for the receiver channel.
1101 Prescaled system clock
1110 DTIN divided by 16
1111 DTIN
1101 Prescaled system clock
1110 DTIN divided by 16
1111 DTIN
3–0
TCS
Transmitter clock select. Selects the clock source for the transmitter channel.
1101 Prescaled system clock
1110 DTIN divided by 16
1111 DTIN
1101 Prescaled system clock
1110 DTIN divided by 16
1111 DTIN
7
6
4
3
2
1
0
Field
—
MISC
TC
RC
Reset
0000_0000
R/W
Write only
Address
IPSBAR + 0x208(UCR0), 0x248(UCR1), 0x288(UCR2)
Figure 23-6. UART Command Register (UCRn)