Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

Appendix A – Flash Upgrade 

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 

 

 

The default serial port parameters should be: 

Data length – 8 bits 
Parity – None 
Stop bits – 1 
Baud-rate of the serial port to which the MultiConnect Adapter is connected should be set 

to 115200 bps for proper operation. 

Enable TFTP server on MultiConnect Adapter by issuing the following command: 

# set ip tftp enable 

OK 

 

 

Following steps explain the procedure to upgrade a flash using the serial COM port (serial flash upgrade). 

Connect the MultiConnect Adapter to a PC COM Port. 

• 

Open an application through which we can access the serial device(e.g., Meterm, zoc, 
hyperterm). 

• 

Reboot the MultiConnect Adapter. 

• 

Wait for the boot message and prompt “press d to download” to appear. 

• 

Press d when prompted. 

• 

Select the XMODEM Protocol from the Terminal application.  

• 

Choose a file (MTXCSEM-TFTP-…) file to be uploaded. 

• 

Perform a file upload. 

 

 

 
The MultiConnect Adapter reboots and will be up after a few seconds (10-15 secs). 
 
The MultiConnect Adapter reboots after it has been successfully upgraded.