Multi-Tech Systems MTS2SA-T ユーザーズマニュアル
Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
28
Serial Commands – Setup
Command Syntax
hangup [serial interface]
Valid serial interface – Modem port S1
Description
When this command is issued, the established live link is brought down.
This command is only valid only for modem port (S1)
This command is only valid only for modem port (S1)
Default Value
-
Success
If physical link is brought down, OK and
Physical link is successfully brought down messages are given
Physical link is successfully brought down messages are given
Error
1. Too few arguments
"Usage: hangup [S1]
Type 'hangup [S1] ?' for more information"
2. “error: Link could not be brought down”
message is given when link could not be brought down
Command Syntax
linkup [serial interface]
Valid serial interface – Modem port S1
Description
Establishes a physical link and PPP on the modem port.
This command is relevant only when the serial interface is a dialing end
with
This command is relevant only when the serial interface is a dialing end
with
dialing-trig-mode configured as "command"
Default Value
-
Success
If physical link is established
OK and
CONNECT 14400 LAPM COMPRESSED
CONNECT 14400 LAPM COMPRESSED
(i.e., CONNECT message from the modem)
are given
are given
Error
1. Too few arguments
"Usage: linkup [S1]
Type 'linkup [S1]' for more information"
2. “error: Link cannot be brought up”
message is given when dialing-trig-mode is not "command”
3. “error: Link is not established”
message is given when link is not established (in case PPP fails to get the
logical link up)
logical link up)
4. “error: Link is already up”
message is given when link is established and this command will not
tear down and bring up the link
5. “error: NO CARRIER / NO DIALTONE / NO ANSWER”
or any error return code from the modem
message is given when link is established and this command will not
tear down and bring up the link
5. “error: NO CARRIER / NO DIALTONE / NO ANSWER”
or any error return code from the modem