Multi-Tech Systems MTS2SA-T ユーザーズマニュアル

Chapter 4 – Command Line Interface (CLI) 

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 

 

Command to specify the auto dial-in port number.  

Note: 

[port_num] is optional here. If port_num is not specified, the standard 

port 23 of the Telnet protocol shall be used. 
This command is valid only for device port S0 

Default Value 

23 

Success 

OK 

Error 

1.  Too few arguments 
 

“Usage: set serial s0 auto-dialin-port [port_num] 

 

Type ‘set serial s0 auto-dialin-port ? for more information” 

auto-dialin auto-dialin-protocol auto-dialout-protocol 
auto-dialin-ipaddress auto-dialout 

 

auto-dialin-port auto-dialout-port 

3. Invalid port 
 

“error: Invalid port number  

 

Type ‘set serial s0 auto-dialin-port ? for more information” 

4. If “set serial s1 auto-dialin-port 23” is given 
    “error: Command not supported on modem port s1” 

 

By default, Telnet is the protocol used to establish the serial-to-Internet 
connectivity. 

 This syntax provides for future extensibility (SSH Client, etc.) 

This command is valid only for device port S0<ftp protocol setting is not yet 
implemented> 

Telnet 

OK 

1.  Too few arguments 
 

“Usage: set serial s0 auto-dialin-protocol <telnet/ftp> 

 

Type ‘set serial s0 auto-dialin-protocol ? for more information” 

2. Multiple matches 

auto-dialin auto-dialin-protocol auto-dialout-protocol 
auto-dialin-ipaddress auto-dialout 

 

auto-dialin-port auto-dialout-port 

3.  Invalid protocol selected 
 

“error: Selected protocol not supported  

 

Type ‘set serial s0 auto-dialin-protocol ? for more information” 

4.  If “set serial s1 auto-dialin-protocol telnet” is given 
 

“error: Command not supported on modem port s1”