Cisco Systems AS5350XM ユーザーズマニュアル

This section describes how to connect the Cisco AS5350XM universal gateway to your network. The 
cables required to connect the universal gateway to a network are not provided. For ordering information, 
contact customer service. See the 

, or see 

 for cable and port pinouts.

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network 
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some 
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

Do not work on the system or connect or disconnect cables during periods of lightning activity. 
Statement 1001

If the universal gateway is configured with fewer than three DFCs, make sure that a blank slot cover is 
installed over each open slot to ensure proper airflow.

The Cisco AS5350XM universal gateway arrives with all carrier cards and DFCs already installed, 
unless you order a card separately as a spare. See the Cisco AS5350XM and Cisco AS5400XM Universal 
Gateways Card Installation Guide for card installation instructions. This document is available on 
Cisco.com. (See the 

.)

Connect an Cisco AS5350XM universal gateway Gigabit Ethernet port to an Ethernet hub using a 
straight-through, RJ-45-to-RJ-45 Ethernet cable. (See 

82735

Ground lug
attachment