Motorola SVG2501 Series ユーザーズマニュアル

B 

 

 
Connecting to the Internet • Renewing the IP Address in Windows XP or Vista 

SVG2501 Series Wireless Voice Gateway • User Guide 

550885-001-a  
 

Check the following: 
•  Your cable connections 
•  Whether you can see cable-TV channels on your television 

After successfully verifying your cable connections and proper cable-TV operation, you 
can renew your IP address, see 

1.  On the Windows taskbar, click Start. 

2.  Click All Programs. 

3.  Click Accessories. 

4.  Click Run to open the Run window. 

5.  Type 

 and click OK to open a command prompt window. 

6.  Type 

 and press Enter to display the IP Configuration. 

If an Auto-configuration IP address is displayed, that indicates possible broadband 
network problems or an improper connection between your computer and the SVG2501. 
The Auto-configuration IP address, ranging from 169.254.0.0 to 169.254.255.255, is 
reserved for Automatic Private IP Addressing (APIPA).  

1.  Click Start on the Windows taskbar. 

2.  Select Run to open the Run window. 

3.  Type 

 and click OK to open a command prompt window. 

4.  Type 

 and press Enter. A valid IP address should appear indicating 

that Internet access is available. 

5.  Type 

 and press Enter to close the command prompt window.  

If, after performing this procedure, your computer still cannot access the Internet, call 
your cable provider. 

Do the following to set up a Wi-Fi network using the WPS button on the SVG2501 front 
panel: 

1.  Power on the SVG2501 Wireless Voice Gateway. 

2.  Power on all the WPS-enabled devices you want to have access to the network, 

such as a PC, router, printer, or telephone. 

The Wi-Fi network will automatically detect the WPS devices.  

3.  Press and hold the WPS button on the SVG2501 for five seconds. 

4.  If applicable, press the WPS button on each additional WPS-enabled device.