Motorola PTP 600 Series ユーザーズマニュアル

 

 

184

13.8.4 Miscellaneous 

supplies 

The following miscellaneous supplies will be required: 

•  Cable ties, cable cleats – for securing cables 
•  Self-amalgamating tape – to weatherproof the RF connectors 
•  PVC tape – for additional protection of the RF connectors and securing cables 

13.8.5  Mounting the Connectorized 600 Series Bridge 

A Connectorized 600 Series bridge is shipped with the same bracket as supplied with an 

Integrated unit. Details on the use of this bracket can be found in section 3.3.7. The 600 

Series bridge should be mounted in a position that gives it maximum protection from the 

elements, but still allows easy access for making off the various connections and applying the 

recommended weatherproofing. 

When using dual polar antennas the Connectorized 600 Series bridge should be mounted in 

such a position as to minimize the cable length, keeping losses to a minimum (taking into 

account the minimum cable lengths required by the FCC regulations, see section 13.7). 

When using separate antennas the Connectorized 600 Series bridge should be mounted in 

such a position as to minimize both cable runs between the unit and the antennas. It is not 

necessary to mount the Connectorized 600 Series bridge at the mid point between the 

antennas. 

13.8.6  Mounting the antennas 

The Antennas should be mounted according to the manufacturer’s instructions. Actual 

antenna position will depend on the available mounting positions and link requirements. It 

may be necessary to mount the antennas 20m apart or at a certain distance from the ground 

to get the desired results.