Netgear WAG102NA ユーザーズマニュアル

2-16

Basic Installation and Configuration

To configure the wireless settings of your 802.11 b/g wireless access point:

1. From main menu under Setup, select Wireless Settings 11b/g. The Wireless Settings 11b/g 

screen will display as shown in 

 below.

2. Configure the Wireless LAN settings based on the following field descriptions:

•

Turn Radio On. On by default, you can also turn off the radio to disable access through 
this device. This can be helpful for configuration, network tuning, or troubleshooting 
activities.

•

Wireless Mode. From the pull-down menu, select the desired wireless operating mode. 
The options are: 

–

Auto (11g/11b) – Both 802.11g and 802.11b wireless stations can be supported. This 
is the default.

–

11g Only – Only 802.11g wireless stations can be used. 

–

11b Only – All 802.11b wireless stations can be used. (The 802.11g wireless stations 
can still be used if they can operate in 802.11b mode.) 

•

Channel/Frequency. From the pull-down menu, select the channel you wish to use on 
your wireless LAN. The wireless channel in use will be between 1 to 11 for US and 
Canada, 1 to 13 for Europe and Australia. The default is channel 11.