RuggedCom RX1510 ユーザーズマニュアル

3. Installation

RuggedCom® RuggedBackbone™

RX1510 Installation Guide Rev 104

3.2.5. DC Power Supply Wiring Examples

Figure 3.13. Wiring for Two DC Power Supplies (24P or 48P modules shown)

• For 125/230VAC rated equipment, a appropriately rated AC circuit breaker must be

installed.

• It is recommended to provide a separate circuit breaker for each power supply

module.

• Equipment must be installed according to applicable local wiring codes.

3.2.6. AC and DC Power Supply Wiring Example

Figure 3.14. Wiring for AC and DC Power Supplies (HIP module shown at left; 24P or 48P module shown at right)