TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 107 - 

• 

Channel Width - The current wireless channel width in use. 

• 

MAC Address - The physical address of the Router, as seen from the WLAN. 

¾

  Traffic Statistics - The Router’s traffic statistics. 

• 

Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port. 

• 

Received (Packets) - Traffic that counted in packets has been received out from the WAN 
port. 

• 

Sent (Bytes) - Traffic that counted in bytes has been sent out from the WAN port. 

• 

Sent (Packets) - Traffic that counted in packets has been sent out from the WAN port. 

¾

 

System Up Time - The length of the time since the Router was last powered on or reset. 

Click the Refresh button to get the latest status and settings of the Router. 

 

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This 

section will guide you to add a new wireless device to an existing network quickly by function. The 

WPS function is only available when the Operation Mode is set to Access Point. Select menu 

“WPS”, you will see the next screen shown in Figure 5-3.   

 

Figure 5-3  WPS 

¾

 

WPS Status - To enable or disable the WPS function here.   

¾

 

Current PIN - The current value of the device's PIN is displayed here. The default PIN of the 

device can be found in the label or User Guide.   

¾

 

Restore PIN - Restore the PIN of the device to its default.   

¾

 

Gen New PIN - Click this button, and then you can get a new random value for the device's 

PIN. You can ensure the network security by generating a new PIN.