TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 141 - 

¾

 

WISP Client Router - In this mode, the device enables multiple users to share Internet 

connection from WISP. 

 

Figure 6-4  the Network menu 

There is only one submenu under the Network menu (shown in Figure 6-4): LAN.   

Choose menu “Network  → LAN”, and then you can configure the IP parameters of the LAN on 

the screen as below. 

 

Figure 6-5  LAN 

¾

 

MAC Address - The physical address of the LAN ports, as seen from the LAN. The value 

can't be changed. 

¾

 

Type - Choosing Smart IP (DHCP) to get IP address from DHCP server, or choosing static IP 

to config IP address manually. 

¾

 

IP Address - Enter the IP address of your system in dotted-decimal notation (factory default - 

192.168.0.254). 

¾

 

Subnet Mask - An address code that determines the size of the network. Normally 

255.255.255.0 is used as the subnet mask. 

¾

 

IGMP Proxy - The Internet Group Management Protocol(IGMP) feature allows your devices 

in LAN can watch TV. 

)

 

1.  If you change the IP Address of LAN, you must use the new IP Address to login to the Router.   

2.  If the new LAN IP Address you set is not in the same subnet with the previous one, the IP 

Address pool in the DHCP server will be configured automatically，while the Virtual Server and 
DMZ Host will not take effect until they are re-configured.