TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 171 - 

3.  When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled. 

 

Figure 7-6    Wireless menu 

There are two submenus under the Wireless menu (shown in Figure 7-6): Wireless Settings and 

Wireless Security.  Click any of them, and you will be able to configure the corresponding 

function.  

Choose menu “Wireless  → Wireless Settings”, and then you can configure the basic settings 
for the wireless network on this page. 

 

Figure 7-7 Wireless Settings - Client 

¾

 

Wireless Name of Root AP - Enter the SSID of AP that you want to access. 

¾

 

MAC Address of Root AP - Enter the MAC address of AP that you want to access. 

¾

 

Region - Select your region from the pull-down list. This field specifies the region where the 

wireless function of the Router can be used. It may be illegal to use the wireless function of 

the Router in a region other than one of those specified in this field. If your country or region 

is not listed, please contact your local government agency for assistance.   

¾

 

WDS Mode -This field determines which WDS Mode will be used. It is not necessary to 

change the WDS Mode unless you notice network communication problems with root AP. If 

you select Auto, then Router will choose the appropriate WDS Mode automatically.