TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 224 - 

¾

 

Storage Authority – Choose  Read and Write or Read Only from the drop-down list to 

assign access authority of Storage Sharing to the user. 

¾

 

Save - You can click the Save button to save your settings. 

¾

 

Back - You can click the Back button to discard the settings and just go to the media server 

configuration page. 

)

Please restart the service for the new settings to take effect.   

If you cannot use the new user name and password to access the shares, press Windows logo + 

R to open the Run dialog box and type net use \\192.168.0.254 /delete /yes and press Enter. 

(192.168.0.254 is your router's LAN IP address. If the LAN IP of the modem connected with your 

router is 192.168.1.x, the default LAN IP of the router will automatically switch from 192.168.0.254 

to 192.168.1.254 to avoid IP conflict; in this case, please try net use \\192.168.1.254 /delete / 

yes.) 

 

Figure 8-37 The Forwarding menu 

There are four submenus under the Forwarding menu (shown in Figure 8-37): Virtual Servers, 

Port Triggering,  DMZ and UPnP. Click any of them, and you will be able to configure the 

corresponding function. 

Choose menu “Forwarding  → Virtual Servers”, and then you can view and add virtual servers 

in the screen as shown in Figure 8-38. Virtual servers can be used for setting up public services 

on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all 

requests from the Internet to this service port will be redirected to the computer specified by the 

server IP. Any PC that was used for a virtual server must have a static or reserved IP Address 

because its IP Address may be changed when using the DHCP function.