TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル
TL-WR710N
WiFi Pocket Router/AP/TV Adapter/Repeater
- 19 -
4. The
Finish page is shown as Figure 3-14. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.
Figure 3-14 Quick Setup – Finish
3.2.2 Access Point Mode
When you choose Access Point on Working Mode page in Figure 3-5 , take the following steps:
1. Click
Next in Figure 3-5, and then Wireless page will appear as shown in Figure 3-15.
Figure 3-15 Quick Setup - Wireless
¾
Wireless Network Name - Enter a string of up to 32 characters. The same name of
SSID (Service Set Identification) must be assigned to all wireless devices in your
network. The default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last
unique six numbers of each Router’s MAC address). But it is recommended strongly
that you change your networks name (SSID) to a different value. This value is
case-sensitive. For example, TEST is NOT the same as test.
¾
Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the Router can be used. It may be illegal to use the wireless