Atlantis Land A02-WRA4-54G ユーザーズマニュアル
I-FLY WIRELESS ROUTER ADSL
28
Always on: If you want the router to establish a PPPoE session when starting up and to
automatically re-establish the PPPoA session when disconnected by the ISP.
Connect to Demand: If you want to establish a PPPoE session only when there is a packet
requesting access to the Internet (i.e. when a program on your computer attempts to access the
Internet).
Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on
the line for a predetermined period of time.
Detail: You can define the destination port and packet type (TCP/UDP) without checking by
timer. It allows you to set which outgoing traffic will not trigger and reset the idle timer.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding
mediaspecific headers) that IP will attempt to send through the interface.
automatically re-establish the PPPoA session when disconnected by the ISP.
Connect to Demand: If you want to establish a PPPoE session only when there is a packet
requesting access to the Internet (i.e. when a program on your computer attempts to access the
Internet).
Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on
the line for a predetermined period of time.
Detail: You can define the destination port and packet type (TCP/UDP) without checking by
timer. It allows you to set which outgoing traffic will not trigger and reset the idle timer.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding
mediaspecific headers) that IP will attempt to send through the interface.
• RFC 1483 Bridge
VPI and VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
Encapsulation method: Select the encapsulation format, this is provided by your ISP.
Ether Filter Type: Specify the type of ethernet filtering performed by the named bridge
interface.
ATM Class: The Quality of Service for ATM layer.
Encapsulation method: Select the encapsulation format, this is provided by your ISP.
Ether Filter Type: Specify the type of ethernet filtering performed by the named bridge
interface.
Spanning Bridge Interface: Enable/Disable spanning tree function of modem.
Ether Filter Type:
ALL
Ether Filter Type:
ALL
Allows all types of ethernet packets through the port.
IP
Allows only IP/ARP types of ethernet packets through the port.
PPPoE
Allows only PPPoE types of ethernet packets through the port.