Atlantis Land A02-WRA4-54G ユーザーズマニュアル
I-FLY WIRELESS ROUTER ADSL
30
3.6.3.2.2 DNS
A Domain Name System (DNS) contains a mapping table for domain name and IP addresses. In the
Internet, every host has a unique and friendly name such as www.yahoo.com and an IP address. As the
IP Address is hard to remember, the DNS converts the friendly name into its equivalent IP Address.
You can obtain a Domain Name System (DNS) IP address automatically, if your ISP provides it when
you logon. Usually when you choose PPPoE or PPPoA as your WAN - ISP protocol, the ISP will
provide the DNS IP address automatically. You may leave it as blank. Or your ISP may provide you
with an IP address of their DNS. If this is the case, you must enter the DNS IP address.
Internet, every host has a unique and friendly name such as www.yahoo.com and an IP address. As the
IP Address is hard to remember, the DNS converts the friendly name into its equivalent IP Address.
You can obtain a Domain Name System (DNS) IP address automatically, if your ISP provides it when
you logon. Usually when you choose PPPoE or PPPoA as your WAN - ISP protocol, the ISP will
provide the DNS IP address automatically. You may leave it as blank. Or your ISP may provide you
with an IP address of their DNS. If this is the case, you must enter the DNS IP address.
3.6.3.2.3 ADSL
Connect Mode: The default is Multimode; it will detect the ADSL line code, G.dmt, G.lite, and
T1.413 automatically. But in some area, it cannot detect the ADSL line code well. At this time, please
adjust the ADSL line code to G.dmt or T1.413 first. If it still fails, please try the other values such as
ALCTL, ADI, etc.
Activate Line: Aborting (false) your ADSL line and making it active (true) again for taking effect
with setting of Connect Mode.
Tx Attenuation: Setting ADSL transmission gain, the value is between 0~12.
DSP FirmwareVersion: Current ADSL line code firmware version.
Connected: Display current ADSL line sync status.
Operational Mode: Display current ADSL mode standard (Operational Mode) your Router is using
when ADSL line has sync.
Annex Type: ADSL Annex A, which works over a standard telephone line. Annex B, which works
over an ISDN line.
Upstream: Display current upstream rate of your ADSL line.
Downstream: Display current downstream rate of your ADSL line.
T1.413 automatically. But in some area, it cannot detect the ADSL line code well. At this time, please
adjust the ADSL line code to G.dmt or T1.413 first. If it still fails, please try the other values such as
ALCTL, ADI, etc.
Activate Line: Aborting (false) your ADSL line and making it active (true) again for taking effect
with setting of Connect Mode.
Tx Attenuation: Setting ADSL transmission gain, the value is between 0~12.
DSP FirmwareVersion: Current ADSL line code firmware version.
Connected: Display current ADSL line sync status.
Operational Mode: Display current ADSL mode standard (Operational Mode) your Router is using
when ADSL line has sync.
Annex Type: ADSL Annex A, which works over a standard telephone line. Annex B, which works
over an ISDN line.
Upstream: Display current upstream rate of your ADSL line.
Downstream: Display current downstream rate of your ADSL line.
3.6.3.3 System
There are six items under the SYSTEM section, Time Zone, Remote Access, Firmware Upgrade,
Backup/Restore, Restart Router & User Management.
Backup/Restore, Restart Router & User Management.