Patton electronic 07MOS10xx-GS ユーザーズマニュアル
Introduction
40
OnSite Series Getting Started Guide
4 • System Management Access
Introduction
This chapter provides the procedures for configuring and monitoring the local serial and LAN management
(LM) ports, and the inband management channel (IMC) for remote management communications. The chap-
ter also provides the procedures for configuring and using the Orderwire communications port (if the AUX
port is factory-installed).
(LM) ports, and the inband management channel (IMC) for remote management communications. The chap-
ter also provides the procedures for configuring and using the Orderwire communications port (if the AUX
port is factory-installed).
General Overview
The base OnSite OS-10 system provides two management ports from which you can access the system man-
agement functions. One of the management ports is an Ethernet LAN (10/100BASE-TX) port. The other is
an RS-232 SERIAL port.
agement functions. One of the management ports is an Ethernet LAN (10/100BASE-TX) port. The other is
an RS-232 SERIAL port.
shows the location of the two management ports on the base OS1052 and OS1063 systems.
Figure 14. Serial and LAN Management Ports on the Base OS1052 and OS1063 Systems