Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 8-7

The 

 command allows you to view the list of secure access filter points, to enable/

disable security globally or for a specific IP protocol filter point, and to define a filter list for 
each filter point. To use this command, enter: 

A screen similar to the following displays:

♦ Note ♦

If security is enabled for a filter point and there are no 
names defined on its list, then the filter point is essen-
tially inaccessible to all users. For example, in the 
above sample display, 

SNMP

 is not accessible to any 

user.

You can enter commands by entering just the first letter of the command. For example, select 

 by entering 

and pressing 

.The question mark option (

) and the 

 option 

provide reference and instructional information on using this command. The 

 option exits 

this command without saving configuration changes. The 

 option refreshes the screen. 

When you are done entering new values, type 

 at the prompt and all new settings will be 

saved.

The following option is available for all filter points:

Applies the filter name(s) defined through the 

 command for this filter point. 

Filter points are disabled by default. The different filter points are defined as follows: