Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 8-9

Configures the same 

value for all secure access protocols. 

 enables security for 

all secure access filter points. 

 disables security for all secure access filter points. Any 

value configured for individual security parameters overrides the global setting. If you wish to 
set a different value for 

, for example, enter the line number for Telnet, 

followed by an equal sign (

) and the new value. 

Configures a single filter list for all security filter points. 

To change any of the 

values, enter the line number for the parameter, followed by an 

equal sign (

), and then 

 or 

 for enable or 

 or 

 for disable at the prompt. For 

example, to enable security for Telnet, enter the following:

To add a filter, at the command prompt, enter the line number for the parameter, followed by 
an equal sign (

), and then the filter’s name at the prompt. For example:

♦ Note ♦

If the filter does not exist in the secure access data-
base, the system prompts you to create the filter. To 
view the list of secure access filters, use the 

 

Enter 

 to save the new filter.

To remove an existing filter from a filter list, at the command prompt, enter the line number 
for the parameter, followed by an equal sign (

), a negative sign (

), and then the filter’s name 

as follows:

To remove all filters in a list, include an asterisk after the negative sign. For example:

Enter 

 to save the change.