Alcatel Carrier Internetworking Solutions Switch/Router ユーザーズマニュアル

Page 28-38

You can obtain general and detailed WAN port statistical information on all 

WSX

 boards in the 

switch, a single 

WSX

 board, individual ports, and Frame Relay and PPP protocols. The 

 command is used to provide this information. This information includes types of 

physical interface, access rate of the Frame Relay line, and errors. In addition, the 

 

command can display the number of frames received and transmitted.

To obtain status information on all 

WSX

 boards in a switch, you enter the 

 command 

without any parameters as follows:

or

This command displays a screen similar to the following (In this example, the port parameters 
being displayed are for a system that contains a 2-port 

WSX

-BRI module in slot 4, an 8-port 

WSX

 module in slot 5, and a 2-port 

WSX

 in slot 8.):

Each row in the table corresponds to a physical port on a 

WSX

 board in the switch. The 

following sections describe the columns shown in this table:

The following section explains the fields and their corresponding values.

The first number in this column is the slot in the switch where this 

WSX

 is installed. The 

second number is the port number on the 

WSX

.

This column shows