Agilent Technologies 20ET ユーザーズマニュアル
4- 17
Printing, Plotting, and Saving Measurement Results
Defining a Plot Function
Selecting Line Types
• Press
and select each plot element line type that you want to modify.
— Select
to modify the line type for the data trace. Then enter the
new line type (see
), followed by
.
— Select
to modify the line type for the memory trace. Then
enter the new line type (see
), followed by
.
Figure 4-6 Line Types Available
NOTE
You must define the line types for each measurement channel (channel 1/3
and channel 2/4).
and channel 2/4).
Choosing Scale
• Press
until the selection appears that you want.
❏ Choose
if you want the normal scale selection for plotting.
This includes space for all display annotations such as marker values and stimulus
values. The entire analyzer display fits within the defined boundaries of P1 and P2
on the plotter, while maintaining the exact same aspect ratio as the display.
values. The entire analyzer display fits within the defined boundaries of P1 and P2
on the plotter, while maintaining the exact same aspect ratio as the display.
❏ Choose
if you want the outer limits of the graticule to
correspond to the defined P1 and P2 scaling point on the plotter. (Intended for
plotting on preprinted rectangular or polar forms.)
plotting on preprinted rectangular or polar forms.)
Table 4-4 Default Line Types for Plot Elements
Plot Elements
Channel 1 Line Type Numbers
Channel 2 Line Type Numbers
Data Trace
7
7
Memory Trace
7
7
MORE
LINE TYPE DATA
x1
LINE TYPE MEMORY
x1
SCALE PLOT
SCALE PLOT [FULL]
SCALE PLOT [GRAT]