Allied Telesis 10/100/1000T Gigabit Ethernet Bridging Converter AT-GS2002 データシート

製品コード
AT-GS2002
ページ / 2
Allied Telesyn
www.alliedtelesyn.com
Datasheet | 
Media Converters
AT-GS2002/SP 
Ethernet Bridging Converter
AT-GS2002/SP
10/100/1000T, 1000 SFP standalone bridging
converter
Overview
The AT-GS2002/SP Ethernet Bridging Converters
are designed to extend the distance of your
network by interconnecting LAN devices that
are physically separated by large distances. These
bridging converters have the functionality to
connect any managed/unmanaged 10Mbps,
100Mbps, or 1000Mbps (1Gbps) switch or hub
using standard 10/100/1000T RJ45 connections
and convert the electrical signal to fiber optical
signal via its SFP port.
Extend the Distance of Ethernet
Each AT-GS2002/SP bridging converter features
a 10/100/1000T twisted pair port and an SFP
port. The twisted pair port has an RJ45
connector and a maximum operating distance
of 100 meters (328 feet). These units can
operate at half- and full-duplex.
The AT-GS2002/SP fiber optic port has a SFP
slot and a maximum operating distance is
dependent on the SFP.
Standalone or Rackmounted
Each small bridging converter is powered by an
external power supply unit for use in
standalone applications. Where multiple media
converters are used, up to 12 standalone
devices can be inserted into a low-cost 
AT-MCR12 rackmount chassis, allowing all the
converters to be powered by a single internal
power supply. In critical applications, a second
load sharing internal power supply can be
installed into the rackmount chassis.The
bridging converters can also be 19” rack
mounted either individually using the AT-WLMT,
AT-TRAY1 or up to four devices using the 
AT-TRAY4.
Hassle Free Support
All Allied Telesyn Ethernet bridging converters
have a limited lifetime warranty and free
technical support, ensuring trouble-free
installation.
Key Features
Converts speed as well as media type
Extends Gigabit networks to distances up to
80km
Auto MDI/MDI-X
Auto-negotiation (IEEE 802.3u-compliant)
Store and forward data packet handling
Support MissingLink™ and Smart
MissingLink™
Transparent to IEEE 802.1Q VLAN packets
Automatic address learning and aging
System and port LEDs
External AC power adapter
Rack-mountable using optional AT-WLMT,
AT-MCR12,TRAY4, or TRAY1  chassis
Ordering Information
AT-GS2002/SP-xx
Gigabit Ethernet bridging converter,
10/100/1000T to SFP (550m to 80km)
Where xx =
10 AC Power supply, US power adapter
20 AC Power supply, European power adapter
30 AC Power supply, UK power adapter
40 AC Power supply, Australian power adapter
90 AC Power supply, US FED – US power adapter
AT-SP Series
1000Mbps SFP product line