Sanyo PLC-XU350K ユーザーズマニュアル

The preparation display will disappear
after 30 seconds.

(See page 53 for Lamp control status.)

Connect  the  projector’s AC  power  cord  into  an AC
outlet. The POWER indicator lights red. Open the lens
cap (see pages 8, 61).

Press  the  ON/SYAND-BY  button  on  the  top  control
or    on  the  remote  control.  The  POWER  indicator
lights green and the cooling fans start to operate. The
preparation  display  appears  on  the  screen  and  the
countdown starts.

After the countdown, the input source that was
selected the last time and the lamp control status icon
(see page 53) appear on the screen.

Complete  peripheral  connections  (with  a  computer,
VCR, etc.) before turning on the projector.

✔

 • When the Logo select function is set to Off, the logo will

not be shown on the screen (p.47).

 • When Countdown off or Off is selected in the Display

function, the countdown will not be shown on the screen
(p.46).

 • During the countdown period, all operations are invalid.
 • When the Input Search function is set to On, the input

signal will be searched automatically (p.45)

 • When Off is selected in the Display function, the Video/

PC  selection  window  and  the  input  signal  guidance
window are not shown on the screen. (p.46)

✔

  The Filter warning and Lamp replacement

icons may appear on the screen depending
on the usage state of the projector.

Lamp control status

If  there  is  no  signal  input  when  start  on  the  projector,
or  the  current  signal  is  missed  while  operating  the
projector,  the  Video/PC  selection  window  will  be
displayed  on  the  screen,  please  move  the  pointer  to
input source desired by pressing the Point

 ed buttons

and  press  the  SELECT  button.   And  then  follow  the
input signal guidance window to correct the signal and
connection.

If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed on the next page.

No signal

Current Input setting:Video 

Is  signal  processed  correctly?  
Is  cable  connected  properly?  

No signal

Current Input setting:RGB

Is  signal  processed  correctly?  
Is  cable  connected  properly?