Sanyo PLC-XU350K ユーザーズマニュアル

TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT
OFF.

Power off? disappears after 4 seconds.

Press  the  ON/STAND-BY  button  on  the  top  control  or
on the remote control, and Power off? appears on the
screen.

Press  the  ON/STAND-BY  button  again  to  turn  off  the
projector. The POWER indicator starts to blink red, and
the cooling fans keep running. (You can select the level
of fans’ quietness and speed. See “Fan” on page 56.)
At this time, you can unplug the AC power cord even if
the fans are still running.

When  the  projector  has  cooled  down  enough,  the
POWER  indicator  stops  blinking  and  you  can  turn  on
the projector.

✔

 • When the On start function is set to On, the projector will

be turned on automatically by connecting the AC power
cord to an AC outlet (p.52).

 • The running speed of cooling fans is changed according

to the temperature inside the projector.

 • Do not put the projector in a case before the projector is

cooled enough.

 • If the WARNING indicator blinks or lights red, see

“WARNING indicator” on page 59.

 • While the POWER indicator is blinking, the lamp is being

cooled down and the projector cannot be turned on. Wait
until the POWER indicator stops blinking to turn on the
projector again.

• The  fan  rotation  will  terminate  directly  if  the AC  power

cord  is  unplugged  immediately  after  the  projector  is
turned off.

• The  projector  can  be  turned  on  after  the  POWER

indicator  turns  red.  The  waiting  time  to  restart  will  be
shortened when the normal power-off processing for fan

   cooling  is  completed,  compared  with  the  time  the AC

power  cord  is  immediately  unplugged  after  the  power-
off.

DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN
HOUR IN EVERY 24 HOURS.