Sanyo PLC-XU350K ユーザーズマニュアル

Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPUTER 1 or the COMPONENT button on the remote control.
Before  using  INPUT  button,  correct  input  source  should  be  selected  through  Menu  operation  as  described
below.

Use the Point

ed

buttons to select Computer 1 and

then press the Point

8

button.

When the input source is coming from video
equipment  connected  to  the  COMPUTER
IN  1/COMPONENT  IN  terminal  with  a
Component-VGA Cable, select Component.

When the input source is coming from video
equipment  connected  to  the  COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).

Press  the  MENU  button  to  display  the  On-Screen
Menu.  Use  the  Point

ed

 buttons  to  select  Input  and

then press the Point

8

or the SELECT button.

✔ 

Note:

   When the Input Search function is set to On1 or On,

the input signal will be searched automatically (p.45).

Use the Point

ed

buttons to select Component or

RGB(Scart) and then press the SELECT button.