Sanyo PLC-XU350K ユーザーズマニュアル
39
Video System Selection
1
AV System Menu (Video or S-video)
AV System Menu (Component)
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 70p, 1035i, and 1080i.
a specific component video signal format from among 480i,
575i, 480p, 575p, 70p, 1035i, and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-video
Component
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
Auto
✔
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
RGB (Scart).
Press the MENU button to display the On-Screen
Menu. Use the Point
Menu. Use the Point
ed
buttons to select Input and
then press the Point
8
or the SELECT button.
Use the Point
ed
buttons to select Video or S-video
or Computer 1(Component) and then press the
SELECT button.
SELECT button.
3
Use the Point
ed
buttons to select System and then
press the Point
8
or SELECT button. Use the Point
ed
buttons to select the desired system and then
press the SELECT button.
Video Input