Sanyo PLC-XW200K ユーザーズマニュアル

②

③

①

④

⑥

⑦

⑤

⑦

 Connect the audio output signal from computer or

video equipment to this jack (pp.14-16).

⑤

 Connect the composite video output signal to this

jack (p.15).

②

 Connect analog RGB output signal from a

computer, S-VIDEO output signal from video

equipment, or RGB scart 21-pin video output or

component video output to this terminal (pp.14-16).

④

 Connect an external audio amplifier to this jack

(pp.14-16).

 This terminal outputs sound from AUDIO IN

terminal.

⑥

 Connect the LAN cable (refer to the owner’s

manual of “Network Set-up and Operation”).

①  CONTROL PORT
 When the projector is controlled by a computer,

connect to this jack with serial control cable.

③

 – Connect analog RGB output signal from a

  computer to this terminal (p.14).

 – This terminal can be used to output the incoming

  analog RGB and Component signal from

  COMPUTER IN 1 /S-VIDEO IN /COMPONENT IN

  terminal to the other monitor (pp.14,16).