Sony SRX-R105 ユーザーズマニュアル
GB
26
PICTURE CONTROL Window
Cha
pte
r 4
A
A
d
jus
tment
tment
s
a
nd Set
tings
Us
Us
ing t
he SRX Con
tro
ller
ller
About the items that cannot be adjusted
Items that cannot be adjusted depending on the input signal
are not displayed in the window.
are not displayed in the window.
For details, see “Input Signals And Adjustable/Setting
Items” on page 30.
Items” on page 30.
PICTURE CONTROL
Window
Window
The PICTURE CONTROL window is used to select the
input source or to adjust the picture quality.
When the screen mode is set to “dual screen” or “quad
screen,” the items can be independently adjusted for each
input channel displayed on the screen.
input source or to adjust the picture quality.
When the screen mode is set to “dual screen” or “quad
screen,” the items can be independently adjusted for each
input channel displayed on the screen.
Input Source
Signal Mode: Click
to select the type of signal from
the drop-down list when a high-definition signal is
input from equipment connected to the optional
LKRI-001 input board. Select “YPbPr” to input the
high-definition signal from component equipment,
and “RGB” to input the high-definition signal from
video GBR equipment.
input from equipment connected to the optional
LKRI-001 input board. Select “YPbPr” to input the
high-definition signal from component equipment,
and “RGB” to input the high-definition signal from
video GBR equipment.
I/P Mode: Selects the I/P conversion mode. Depending on
the input signal source, set the mode to “Interlace” or
“PsF.”
“PsF.”
Signal Info (Information)
Shows the horizontal and vertical frequencies of the input
signal automatically. The values are approximate.
The type of the input signal is also displayed.
signal automatically. The values are approximate.
The type of the input signal is also displayed.
fH: Displays the horizontal frequency.
fV: Displays the vertical frequency.
fV: Displays the vertical frequency.