Viewsonic PJ1172 ユーザーズマニュアル

With the INPUT menu, the items shown in the table below can be 

performed. Perform each operation in accordance with the 

instructions in the table below.

(This table is continued to the following page.)

Item

Description

COLOR SPACE

Select a color space mode using the S/T buttons.:
    AUTO  RGB  SMPTE240  REC709  REC601
Selecting AUTO automatically selects the optimum mode.

This item can be selected only at a RGB signal or a component 

video signal other than a COMPONENT port input of 525i/625i/

SCART RGB.

The AUTO operation may not work well at some signals. In such a 

case, select the SMPTE240 or the REC709 for a HDTV signal.

COMPONENT

Select a function of COMPONENT port using the S/T buttons.:

    COMPONENT  SCART RGB
When SCART RGB is selected, the COMPONENT port functions as a 

port for SCART RGB signal input. Please refer to the section 

“Connecting Your Devices”.

VIDEO

Select a signal type mode using the S/T buttons.:

   

 AUTO  NTSC  PAL  SECAM  NTSC4.43  M-PAL  N-PAL

Selecting AUTO automatically selects the optimum mode.

This item is performs only at a video signal from the VIDEO port 

or the S-VIDEO port. For a component video signal, the signal type is 

identified automatically independently of this function.

The AUTO operation may not work well at some signals. If the 

picture becomes unstable (ex. a irregular picture, a color lack), please 

select the mode depending on the input signal.

3D-YCS

Select TURN ON or TURN OFF using the S/T buttons.:

    TURN ON  TURN OFF
When TURN ON is selected, the 3D-YCS mode works for a 

completely still image, or images with little motion.

This item performs only at a NTSC3.58 video signal.

When this function performs, the setting of the item “VIDEO NR” 

of this INPUT menu is not effective.

VIDEO NR

Select a noise reduction level using the S/T buttons.: 

    HIGH  MIDDLE  LOW
The noise on screen is reduced according to the selected level.

This item performs only at a video signal from the VIDEO port or 

the S-VIDEO port. At a video signal of NTSC3.58, this function 

performs only when TURN OFF is selected to the item “3D-YSC” of 

this INPUT menu.

When this adjustment is excessive, certain degradation may 

appear on the picture.