JVC 250 ユーザーズマニュアル

The projector can be controlled by a VT-100 terminal. If a VT-100 is not
available, a PC with Windows 3.1 or ProComm for DOS can emulate a VT-100.
Table 8-1 shows the equivalent commands for the terminal and both remotes.

1.

 

From Windows Program Manager, select TERMINAL then SETTINGS.

2.

 

Select TERMINAL EMULATION from SETTINGS menu.

3.

 

Select DEC VT-100 (ANSI) (may already be selected).

4.

 

Use a Null Modem cable to connect between the projector and the
terminal.

5.

 

Use the TERMINAL PREFERENCES and COMMUNICATIONS
PROTOCOL below for Windows setup.

Select SETTINGS again from the menu bar. Select TERMINAL
PREFERENCES. Set the following modes:

Terminal preference settings

Line Wrap

Yes

CR"CR/LF:

Local Echo

No

     Inbound

No

Sound

Yes

     Outbound

No

Columns:

Cursor:

     80:

Yes

     Block:

Yes

     132:

No

     Underline:

No

     Blink:

Yes

Terminal Font:

Translations

NONE

     Courier 12

IBM to ANSI

No

Terminal Show:

     Scroll Bars

Yes

Buffer Lines

100

Use Function Arrow
and Control keys for
Windows

No