Epson S1D13504 ユーザーズマニュアル
Epson Research and Development
Page 7
Vancouver Design Center
Interfacing to the NEC VR4102™ Microprocessor
S1D13504
Issue Date: 01/02/02
X19A-G-007-07
1 Introduction
This application note describes the hardware and software environment required to provide
an interface between the S1D13504 Color Graphics LCD/CRT Controller and the NEC
V
an interface between the S1D13504 Color Graphics LCD/CRT Controller and the NEC
V
R
4102
TM
Microprocessor (uPD30102). The NEC V
R
4102 Microprocessor is specifically
designed to support an external LCD controller and the pairing of these two devices results
in an embedded system offering impressive display capability with very low power
consumption.
in an embedded system offering impressive display capability with very low power
consumption.
The designs described in this document are presented only as examples of how such
interfaces might be implemented. This application note will be updated as appropriate.
Please check the Epson Electronics America Website at http://www.eea.epson.com for the
latest revision of this document before beginning any development.
interfaces might be implemented. This application note will be updated as appropriate.
Please check the Epson Electronics America Website at http://www.eea.epson.com for the
latest revision of this document before beginning any development.
We appreciate your comments on our documentation. Please contact us via email at
techpubs@erd.epson.com.
techpubs@erd.epson.com.