Sharp FODC550 ユーザーズマニュアル
SET UP THE SOFTWARE
46
9
Follow the instructions in the plug and play window to install
the MFP driver.
the MFP driver.
Follow the on-screen instructions.
This completes the installation of the software.
• If you installed Button Manager, set up Button Manager as explained in "SETTING
UP BUTTON MANAGER" (p.51).
Windows 95/98/Me/NT 4.0/2000 (Parallel)
1
The parallel cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
happens, click the "Cancel" button to close the window and disconnect the
cable.
2
3
Click the "MFP Driver"
button.
button.
To view detailed information on
the software, click the "Display
Readme" button.
the software, click the "Display
Readme" button.
4
The "Welcome" window will appear. Click the "Next" button.
If you are running Windows 2000 and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Yes".
regarding the Windows logo test or digital signature, be sure to click
"Yes".
A "USB 2.0 Composite Device" installation window may appear prior to
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
this procedure. In this case, follow the instructions in the window to
install the USB 2.0 Composite Device.
The cable will be connected in step 10.
In Windows 95/NT4.0,
the "Utility Software"
button does not appear
and only the printer
driver can be installed.
the "Utility Software"
button does not appear
and only the printer
driver can be installed.
Caution
Note
Note
Note
!05-Setting up.fm 46 ページ ２００４年３月３０日 火曜日 午後４時２９分