Sharp FODC550 ユーザーズマニュアル

ページ / 116
SET UP THE SOFTWARE
48
8
When the model selection window appears, select model name 
of your machine and click the "Next" button.
Follow the on-screen instructions.
9
You will return to the window of step 3. If you wish to install 
Sharpdesk, click the "Utility Software" button.
To install the Utility Software, see "Installing the Utility Software" (steps 12 
and 13 on page 42).
If you do not wish to install the Utility Software, click the "Close" button.
A message will appear instructing you to connect the machine to your 
computer. Click the "OK" button.
10
Make sure that the power of the machine is turned on, and then 
connect the parallel cable (p.56).
11
This completes the installation of the MFP driver.
Using the machine as a shared printer
If the machine will be used as a shared printer on a network, follow these steps to 
install the MFP driver in the client computer.
1
Perform steps 2 through 7 in "CUSTOM INSTALLATION" (p.40 - 
p.41)
.
If you are running Windows 2000 and a warning message appears 
regarding the Windows logo test or digital signature, be sure to click 
"Yes".
• To configure the appropriate settings in the print server, see the 
operation manual or help file of your operating system.
"Print server" as explained here is a computer that is directly 
connected to the machine, and a "Client" is any other computer that 
is connected to the same network.
• When the machine is used via a network connection, only the printer 
function can be used; the scanner function cannot be used.
Caution
Note
FO-DC550_Copy(Sec).book  48 ページ  2004年3月25日 木曜日 午後3時44分